We are specialized in the industry by manufacturing and supplying a wide range of Wave Soldering Machine. These are especially assembled for high mass and volume manufacturing in industry. Offered range of Wave Soldering Machine is developed in compliance with defined international standards of quality and durability. In addition to this, we stringently inspect the entire series on the parameters of service life and functionality. Features: Consumes less floor space Long functional life Convenient operation Technical Specifications: Features Model WSM 200 (Single Wave) WSM 300 S (Single Wave) WSM 300D (Dual Wave) General Power Supply 220V AC, 50 Hz 1 Ph, 20A 440V AC, 50 Hz 3 Ph, 27A 440V AC, 50 Hz 3 Ph, 42A Dimensions(With Vonv. Length) L-2900 W-850 H-1100 mm L-3500 W-900 H-1800 mm L-3500 W-900 H-1800 mm Weight 180 Kg 320 Kg 380 Kg Construction Table Top1 Floor Model Floor Model SOLDER BATH Wave Width 200 mm 300mm 300mm Solder Bath Capacity 95 Kg 115 115 x 2 = 230Kg Max. Wave Height 0-8mm 0-8mm 0-8mm Warm up Time. 60min 70min 70min Solder Bath Power 2.4Kw 3.0 Kw 3.0 x 2=6.0Kw FLUXER Flux Capacity 3 Ltr 4 Ltr 4 Ltr Air Consumption 3.5 cfm(30 PSI) 4.0cfm(30 PSI) 4.0cfm(30 PSI) CONVEYOR Conveyor Speer 0-2.5 M/min 0-2.5 M/min 0-2.5 M/min Conveyor Angle 5,6,7 degree in Steps 4-10 degree step - less 4-10 degree step - less PRE-HEATER Pre Heater Length 800 mm 900 mm 900 mm Pre Heater Power 2.0 KW 3.0 KW 3.0 KW

Loose Radial Lead Cutter – ARP 360 by Estovir Technologies The Loose Radial Lead Cutter - ARP 360 by Estovir Technologies is a compact, high-precision machine engineered for trimming loose radial component leads such as capacitors. Designed for electronics manufacturing units, it delivers clean and consistent cuts, improving productivity and reducing manual effort. With an output of 20–30 pcs/min, this 20 kg benchtop machine is ideal for PCB assembly lines and component preparation in mass production environments. Technical Specification Model: ARP 360 Component Types: Capacitors, LED & Loose Radial Components Component Body Diameter: 3–15 mm Lead Diameter: Ø0.4 – Ø1.0 mm Output Capacity: 20–30 pcs/min Power Supply: 220V AC, 50 Hz Dimensions: 500 × 400 × 450 mm Weight: 20 Kg Key Features of ARP 360 Loose Radial Lead Cutter Efficient Lead Cutting: Automatically trims loose radial component leads with accuracy and speed. Wide Compatibility: Supports body diameters ranging from 3–15 mm and lead diameters from Ø0.4 – Ø1.0 mm. Precision Mechanism: Provides clean, uniform cuts without damaging delicate electronic parts. Compact & Lightweight Design: Small footprint (500 × 400 × 450 mm) makes it easy to place on existing production lines. Durable Build: Industrial-grade materials ensure reliability for continuous use. User-Friendly Interface: Equipped with a simple control panel for quick setup and minimal training. Applications of ARP 360 Loose Radial Lead Cutter The ARP 360 is designed for industries where speed, precision, and reliability are essential in handling loose radial components. Its compact size and high cutting accuracy make it ideal for a wide range of PCB assembly and electronics manufacturing applications. Capacitor and loose radial component trimming in bulk production. PCB assembly lines requiring precise and uniform lead cutting. Consumer electronics manufacturing units. Industrial electronics production where continuous operation is needed. Benchtop cutting solution for small and mid-scale factories. Why Choose ARP 360 Loose Radial Lead Cutter? The ARP 360 by Estovir Technologies is built for manufacturers who need an affordable, compact, and efficient solution for cutting loose radial leads. With its precision cutting mechanism, durable design, and easy operation, it is trusted by professionals across the electronics industry. Accurate and consistent cutting performance. Compact benchtop design suitable for small workspaces. Reliable for continuous operation in production environments. Simple controls for quick setup and user convenience.

Automatic Loose Radial Lead Cutter – ARP 366 by Estovir Technologies The ARP 366 Automatic Loose Radial Lead Cutter by Estovir Technologies is a high-performance machine engineered for capacitor and loose radial component processing. Designed for mass production environments, it automates the trimming of radial component leads with remarkable precision. With an impressive output capacity of 2500–4000 pcs/hr, the ARP 366 boosts productivity while maintaining accuracy and reliability. Built with a sturdy industrial-grade frame, this 145 kg unit is ideal for factory floor integration in large-scale electronics manufacturing. Technical Specfication Model: ARP 366 Component Types: Capacitors, LED & Loose Radial Components Component Body Diameter: 3–15 mm Component Height: 3–18 mm Lead Diameter: Ø0.4 – Ø1.0 mm Output Capacity: 2500–4000 pcs/hr Bowel Feeder Diameter: Ø 380 mm Air Pressure: 30 PSI Power Supply: 220V AC, 50 Hz Dimensions: 830 × 550 × 1100 mm Weight: 145 Kg Components Forming Specification: A (Component Body Diameter): 3–15 mm H (Component Height): 3–18 mm W (Lead Diameter): Ø 0.4 – Ø1.0 mm Key Features of Automatic Loose Radial Lead Cutter – ARP 366 High-Speed Cutting Consistent output of 2500–4000 pcs/hr. Maintains precision without slowing down production. Wide Compatibility Handles body diameters of 3–15 mm and height of 3–18 mm. Supports lead diameters from Ø0.4 – Ø1.0 mm. Precision Mechanism Ensures uniform, damage-free cuts. Optimized for delicate components like capacitors. Heavy-Duty Design Industrial-grade structure for continuous use. Withstands long production cycles without performance drop. Compact & Efficient Integration Small footprint (830 × 550 × 1100 mm) saves space. Easy relocation and setup on existing production lines. Advanced Bowl Feeder System Ø 380 mm feeder bowl ensures stable feeding. Reduces downtime by automating component flow. User-Friendly Operation Equipped with a simple control panel. Quick adjustments with minimal operator training. Applications of Automatic Loose Radial Lead Cutter – ARP 366 Capacitor and loose radial component processing in mass production. PCB and electronics manufacturing lines requiring precise trimming. Consumer electronics component preparation and lead cutting. Industrial electronic assembly units with continuous operations. Automated capacitor packaging and sorting facilities. Automated capacitor packaging facilities Why Choose Automatic Loose Radial Lead Cutter – ARP 366 High-speed cutting with 2500-4000pcs/hrs output. Precise, uniform cuts without component damage. Heavy-duty design for continuous industrial use. Compact footprint for easy production line integration. User-friendly controls for quick setup and operation. Trusted by global electronics manufacturers.

Automatic De-Taping Machine for Taped Radials – UAP 850 R High-Speed, Precise & Reliable De-Taping Solution The Automatic De-Taping Machine for Taped Radials – UAP 850 R by Estovir Technologies is an advanced motorized solution designed for fast and accurate cutting of taped radial components. As the upgraded version of the MAP 860 R, this de-taping machine delivers superior speed, consistency, and efficiency for high-volume electronics and PCB manufacturing. Technical Specification: Model: UAP 850 R Output Capacity: Up to 10,000 pcs/hr Lead Diameter: Ø 0.4 mm – Ø 0.8 mm (soft wire) Power Source: 220V AC, 50 Hz Operation Type: Motorized / Automatic Dimensions: 370 mm × 160 mm × 205 mm Weight: 8 kg Component Forming Specification A (Lead Body Length): 3.5 – 40 mm B (Lead Length): 3.6 – 15 mm W (Lead Wire Diameter): Ø 0.4 – Ø 0.8 mm Key Features of UAP 850 R Automatic De-Taping Machine Motorized Automatic Operation – Minimizes manual intervention for reliable, consistent output. High-Speed Performance – Processes up to 10,000 components per hour, ideal for large-scale manufacturing. Precision Cutting Mechanism – Handles soft wire leads up to 0.8 mm with clean and uniform cuts. Compact & Space-Saving Design – Dimensions: 370 × 160 × 205 mm, perfect for small workspaces. Energy Efficient – Runs on less than 100 W power consumption. Low Maintenance & Long Life – Built with industrial-grade durability for extended use. Applications of the Automatic De-Taping Machine The Automatic De-Taping Machine for Taped Radials – UAP 850 R is versatile and widely used across industries where precision and high-speed output are critical: Electronics manufacturing – De-taping resistors, capacitors, and other radial components. Automotive electronics – Ensures accurate preparation of large-volume components. Consumer electronics assembly – Handles small, delicate taped parts with precision. PCB manufacturing – Streamlines taped component processing. Appliance & device production – Ideal for bulk taped radial leads. Why Choose Estovir Technologies' UAP 850 R? Engineered for Speed & Accuracy – Consistent results with every cycle. Adaptable & Space-Saving – Compact size with adjustable speed control. Reliable & Energy-Efficient – Consumes minimal power while delivering maximum output. Built for Durability – Industrial-grade construction with minimal maintenance requirements. If your production demands speed, precision, and reliability, the Automatic De-Taping Machine for Taped Radials – UAP 850 R is the perfect solution. With its compact size, high output capacity, and low energy usage, this machine significantly improves productivity while maintaining long-term dependability. Upgrade your assembly line with the UAP 850 R from Estovir Technologies – where precision meets productivity.

Manual Forming for Taped Axials (Horizontal) – MAP 301 H by Estovir Technologies Estovir Technologies introduces the MAP 301 H—a compact, efficient machine designed for manual forming of taped axial components into a vertical U-shape. The unit is ideal for dense PCB assemblies where horizontal mounting is essential. It is manually operated through a crank, ensuring complete control and precise lead formation. The MAP 301 H is best suited for medium-volume production across electronics, automotive, and assembly industries. Key Features of Manual Forming for Taped Axials (Horizontal) – MAP 301 H High-Speed Output: Delivers an output capacity of up to 18,000 pieces per hour, enabling fast and efficient production. Precision H-Shape Lead Forming: Forms components into a consistent vertical U-shape, ideal for densely populated circuit boards. Manual Crank Operation: Manual operation via crank handle provides enhanced control and accuracy without relying on electricity. Supports Lead Diameters Up to 1.37mm: Accommodates various component sizes, making it highly adaptable to different production requirements. Compact Machine Design: Its compact footprint (250 X 250 X 200 mm) saves space on the production floor. Rugged Industrial Build: Built with durable materials for vibration-free operation and long-term stability in industrial conditions. Quick Changeover Capability: Allows fast pitch and leg length adjustments, significantly reducing downtime during component changeovers. Low Maintenance Requirement: Designed with simplicity in mind, requiring minimal maintenance while maintaining high performance. Why Choose Manual Forming for Taped Axials (Horizontal) – MAP 301 H? The MAP 301 H offers the perfect balance of precision, control, and productivity. Its manual crank operation provides the operator with full control, allowing for fine-tuning and customization during forming. Built with a compact, heavy-duty frame, it supports small-to-mid-scale operations that demand consistency and reliability. Whether you’re handling dense PCBs or varied lead sizes, this machine is engineered to perform. Perfect for small spaces and mobile workstations Eliminates need for electrical setup Ideal for continuous use in industrial environments Easy to operate, adjust, and maintain Designed by Estovir Technologies for long-term value Applications of Manual Forming for Taped Axials (Horizontal) – MAP 301 H MAP 301 H is widely used in manufacturing environments that require Horizontal lead forming: Electronics and PCB manufacturing lines Automotive electronic assembly units Industrial component forming and processing setups Consumer electronics and LED-based systems Component packaging and reshaping facilities Product Type Compatibility: Axial leaded components in taped form Automatic Grade: Manual (non-electric, fully mechanical)

The MAP 860 Manual Cut & Bend Machine for Taped Axial Components is engineered to deliver precision, efficiency, and reliability for electronics manufacturing environments. Designed by Estovir Technologies, the MAP 860 offers superior handling of taped axial components, optimizing production workflows while ensuring consistent component preparation. Key Features: 1. Precision Cutting & Bending: • High-accuracy blade system ensuring uniform cutting lengths. • Adjustable bending angles for tailored component shaping. 2. Ergonomic Design: • User-friendly manual operation reducing operator fatigue. • Compact footprint suitable for diverse workstation setups. 3. Versatile Compatibility: • Supports a wide range of taped axial upto lead Ø 0.8 mm softwire. • Adjustable guides for quick adaptation to varying tape widths. 4. Robust Construction: • Industrial-grade materials for enhanced durability and longevity. • Low-maintenance design with easy access to critical components. 5. Enhanced Throughput: • Streamlined manual operation for higher processing speeds. • Consistent output quality, minimizing rework and waste.

With the assistance of cutting edge technologies, we are able to manufacture and export a wide variety of PCB Leading Cutting MC. Our professionals precisely engineer these machines by utilizing the best quality materials and components. High in performance and durability, these machines are especially incorporated to trim the extra lead in PCBA post soldering activities. To maintain the quality standards, we test the PCB Leading Cutting MC on longevity parameters. Features: Smooth operations Rugged design Easy to operate Features & Specifications The machine is designed to trim the extra leads of PCBA after the soldering process. The fast turning tungsten caribide blade cuts the wire leads while the PCB are fed on the machine track manually. For safety, it is absolutely required to push the PCBA by handle. Tungsten Caribide Blade ID - 70 mm, OD - 200 mm & 250 mm both size Thickness of PCB 0.8 mm to 2.5 mm Max. PCB Size 500 mm (L) x 300 mm (W) Power 220 V AC, 50 Hz Main Spindle Speed 4500 RPM Main Motor Power 1/2 HP Cutting Height 0.6 mm Minimum Weight 95 kg

Banking on rich industrial experiences, we are indulged in manufacturing and supplying a broad series of Universal Manual Pre Former. Our machines eliminate the risk as these are integrated by incorporating quality assured and reliable materials. All our equipments are suitable for tooling of various radial and loose axial components. The offered series of Universal Manual Pre Former is reliable to use and can be availed in different capacities and specifications. Features: High productivity Unbeatable operational efficiency Fast and reliable Further Details: Manual operation Versatile machine with variety of tool option Suitable for loose axial and radial components Easy adjustments Hardened steel tooling Ideal for low to medium volume production Technical Specifications Dimensions L-165, W-105, H-100mm Weight 1.2 Kg

Automatic Dip-Soldering Machine Features & Specifications Digital Temperature Controller for Solder Bath Electronic Timer for setting dwell (solder) time Easy mechanical adjustments for depth setting Versatile PCB Carrier for fixing multiple PCB's Bath Size 14” x 14” 18” x 14” Solder Capacity 35 Kg 45 Kg Power Supply 220 V AC, 50Hz 220 V AC, 50Hz Heater Power 3.2 KW 4.0 KW Heat up Time 35 35 min Bath Depth 50 50mm Dimensions 690 x 460 x 360mm 790 x 460 x 360 Weight(without solder) 45 Kg 50Kg. Standard Accessories PCB Carrier – 1 no PCB Carrier - 1 no Scrapper 1 no Scrapper 1 no L/N Key Kit-1 no L/N Key Kit - 1 no